Stoves with metal casing have been produced in Pärnu since the 1990s. First they were produced at Härma Metall. Since 2006 they have been produced by SKAMET. If you choose a stove correctly – in accordance to the size of bench and other parameters (without water tank), the heating time will make approx. 30-45 min. (model with water tank requires more time for heating, depending on the size of tank). This time is enough to heat sauna bench until 100 degrees. Fresh air intake and used air exit are also relevant.

Showing all 9 results

Stoves heated from other room

Stove is installed in wall and heated from other room. Its penetrating part is 170 mm long. If required, this

Stoves heated in the same room

Wood burning compartment is in sauna room. Standard stoves are made considering an opportunity with upper or back-wall connection with

Decorative strip

Decorative strip  Decorative strip is available on request. It penetrates through walls from one room to another. Dismountable grills are

Models with water tanks 40l

Sauna stoves are made in two sizes: Smaller heater (model P-11640) with heated area 8 -18 m³; stove height 73

Mini

PS series models are meant to be used for heating smaller sauna rooms and barrel saunas and intended for generating

Mini

PS series models are meant to be used for heating smaller sauna rooms and barrel saunas and intended for generating

Sauna stove with metal casing

Stoves with metal casing have been produced in Pärnu since the 1990s. First they were produced at Härma Metall. Since

Basic stove

Sauna stoves are made in two sizes: Smaller heater (model P-216) with heated area 8 -18 m³; stove height 73

Basic stove

Sauna stoves are made in two sizes: Smaller heater (model P-116) with heated area 8 -18 m³; stove height 73