Other products
In addition to sauna stoves and their accessories we offer other products that work on burning wood: smokeries, barbeque grills, stoves, bathroom stove water heaters, etc. We offer a possibility to produce prototypes on client’s request.
Small smoking chamber
| Small smoking chamber is rectangular in shape and surrounded with double-wall from three sides (that ensures good performance of grill even in cold weather). External dimensions – 125x40x40 cm; with dismountable pipe. Pipe is stationary. Grill features handles for easy transportation.All sizes are given in manuals |
Middle smoking chamber
| Big smoking chamber is rectangular in shape and surrounded with double-wall from three sides (that ensures good performance of grill even in cold weather). External dimensions – 170x50x50 cm; with dismountable pipe. All sizes are given in manuals |
Big XL smoking chamber
| Big smoking chamber is rectangular in shape and surrounded with double-wall from three sides (that ensures good performance of grill even in cold weather). External dimensions – 205x50x50 cm; with dismountable pipe. All sizes are given in manuals |
Water pocket to S-series sauna stoves
| In all Skamet net cover stoves (S-Series) have the opportunity to use a removable water pocket (VT). Now have opportunity to change the waterpocket location according to Your wishes (right, left or behind). If customer want, then can connect also all three at once, but then You need to know, that the more water pockets, the longer is the heating time.
The stove have both sides and behind fastening strips, where You can easily confirm the water pocket. These strips will also provide additional strenght to sauna stove construction. NB! Sauna stove with angular net (models S and ST) can be water pocket connected to the right, left and back sides, but stove with round net (models SY and STY) just to the right and left sides. !!! In addition to the removable water pockets it is still possible to order the stove with welded water pocket. Their positive side is higher water heating efficiency (because of one wall between the fire and warming water). |
Cooker
| Cooker is heated similarly to sauna stoves with metal casing – i.е. the distance between inner part of stove and its casing makes 5 cm, cold air goes up through the gap. This way air circulation is enhanced and room gets warm quickly. External dimensions 86x48x53 cm. Connection with pipe is in the back wall. Hot water boiler can be connected to cooker (either on the right or left). The upper surface of stove is covered with cast-iron plate, where food can be cooked. Compartment for keeping wood is made in the lower part of stove (35x39x47.5 cm).All sizes are given in manuals |
Stove with closed boiler
| Stove with net casing with closed boiler is suitable for smaller sauna (6-10 m³). Pipe is joined above stove. Hot water boiler is also installed above, and smoke pipe is installed inside boiler. Stove can be ordered with or without glass door. Capacity of boiler for standard stove is 110 litres (bigger or smaller models can be also produced). Examples of dimensions: fire burning compartment (part with fire grate bar) – 62×54 cm. Height – 45 cm. Boiler diameter – 45 cm. The height of 110-litre-boiler is 80 cm. Total height –125 cm. Boiler features three nipples ½” (one for incoming water, second for outcoming water and third – for protective valve) and one more female-threaded nipple for thermometer. |
Bathroom water heater with open boiler
| Bathroom water heater with metal casing and open boiler is intended for heating water. This heater features double-casing, inside of which boiler from ferrous metal is installed. Smoke chimney is connected from the back side of heater. Heater can be made with or without glass door. Models with corrosion resistant boiler can be also produced. Examples of dimensions: door width – 33 cm and height 45 cm. Diameter 40 cm. The height of 110-litre-boiler is approx. 110 cm. Boiler features one nipple ½” (for incoming water) and a lid. |
Barbeque grill
| Our range of products also includes different barbeque grills. Standard grills are made from 2-mm-thick metal. Thicker grills or grills in accordance with client’s wishes can be produced on request. Models are variable: with or without lid, made from ferrous metal or stainless steel. Barbeque grills feature dismountable legs. Examples of dimensions (length x width x depth): Barbeque grills are available in three sizes: 100x40x17cm / 70x30x17cm / 50x30x17cm. Height – 90cm. Each model is equipped with grid, which covers a part of grill and can be dismounted. |
Trays
| Trays can be used for making fire or cooking grill-meat. Diameter of – 45 cm and its height is 30 cm. Thickness of metal for standard tray is 2 mm. Metal thicker than that can be used on request. We also produce models that client may order: e.g. on legs or made from corrosion resistant metal. |
