Stoves with metal casing have been produced in Pärnu since the 1990s. First they were produced at Härma Metall. Since 2006 they have been produced by SKAMET. If you choose a stove correctly – in accordance to the size of bench and other parameters (without water tank), the heating time will make approx. 30-45 min. (model with water tank requires more time for heating, depending on the size of tank). This time is enough to heat sauna bench until 100 degrees. Fresh air intake and used air exit are also relevant.
Sauna stove with metal casing
Related products
Accessories
Net around the smokepipe Nets around the smoke pipe are installed around tube before installation of a smoke pipe itself.
Stoves heated from other room
Stove is installed in wall and heated from other room. Its penetrating part is 170 mm long. If required, this
Stoves heated in the same room
Wood burning compartment is in sauna room. Standard stoves are made considering an opportunity with upper or back-wall connection with
Sauna stove with net casing Stoves heated in the same room
Fire-burning compartment is in the sauna room. Standard models only feature the upper chimney connections, from the door side. The
Stoves heated in the same room
Fire-burning compartment is in the sauna room. Standard models only feature the upper chimney connections, from the door side. The
Customized sauna stoves
Various alterations can be made in any model, most of which are only done in the factory (T), but some
Customized sauna stoves
Various alterations can be made in any model, most of which are only done in the factory (T), but some
Stoves heated from other room
Stove is installed and heated from other room. Penetrating part is 200 mm long. If required, this part may be